Description
Features:
– Bandwidth: 15-300KHz (-3dB)
– Current range: 200mApk-500Apk
– Output Sensitivity: 10mV/A
– Typical Accuracy: 1%
Adopts the Rogowski coil current measurement system: within the range, the output signal of the system and the current signal to be measured are always linear, so the accuracy will not change with the current;
The RCP500 measures AC current up to 500A pk, minimum to 200mA pk, with bandwidth ranging from 15Hz to 300KHz, 1% accuracy, and has less than 2mV noise.
Directly powered by Micsig UPI interface, realise auto scaling setup. Support USB power supply, suitable for any brand of oscilloscope.
| Model | RCP500 |
| Bandwidth | 15-300KHz (-3dB) |
| Current range | 200mApk-500Apk |
| Output Connector | Powered BNC / External BNC |
| Output Sensitivity | 10mV/A |
| Typical Accuracy | 1% |
| Phase Accuracy | ≤0.8° (45Hz-66Hz) |
| Temperature Coefficient | Operating temp. range + 0.05 × Accuracy Specification /℃ (23℃±5℃) |
| Conductor Positional Accuracy | Within ±1% (Deviation from the Center) |
| Influence of External Magnetic Fields | 1.5% f.s. or below (400A/m,50Hz/60Hz) |
| Offset Voltage | ±1mV or below |
| Max Voltage | AC 10kV RMS (1 minute), (50Hz/60Hz) (Rogowski coil part only) |
| Output Impedance | High resistance |
| Output Noise | ＜2mv rms |
| Conductor Under Test Diameter | ≤Φ50mm |
| Power Supply | DC 5V |
| Coil to Integrator Cable Length | 2m (customizable) |
| Integrator Dimensions | 37*22*82mm |
| Rogowski Coil Inner Diameter | 50mm (customizable) |
| Rogowski Coil Thickness | Approx. φ6mm |
| Environmental Characteristics | |
| Operating Temperature | -20-70℃ |
| Storage Temperature | -30℃-70℃ |
| Operating Humidity | Max 80%, no condensation |
| Operating Altitude | ≤ 2000m |
| Operating Place | Indoor use, Pollution Degree 2 |
Reviews
There are no reviews yet.