Voltage Drop Simulator (Battery supply)

Description

Pulse 2b, Pulse 4, slow sine wave noise and other complicated voltage variation test can be conducted by APGxx series simulator. It is a cost-effective way to replace APSxx series for slow waveforms or high current condition. It can simulate multiple battery supply waveforms as per international standards and multiple automotive manufacture standards. Also, as a powerful DC source, it can be supply power for DUT during automotive transient pulse test, which can meet 42V, 24V and 12V supply voltage. For different models and test applications, the test voltage is up to 60V and current is up to 300A.

•  5.7 inch color touch screen；> Test voltage up to 60V；
•  Test current up to 300A    > low output impedance；
•  Unipolarity output；  > high impulse current capacity；
•  Powerful DC voltage source； > bandwidth up to 30KHz；
•  Pulses 4 and 2b as per ISO 7637-2；
•  Voltage variation test as per ISO 16750-2；
•  Pre-programmed test routines to simulate various supply waveforms；
•  Ethernet, RJ45, PC control, and test report documentation and print

*）There is a large amount of inrush current for some of the test products (eg motor equipment, exhaust fans, wipers, air conditioners, etc.) or in the presence of large capacitive energy storage fittings. This inrush current is 3-10 times of normal current or even greater. If the customer’s inrush current is not confirmed, our company’s CTM series of current test module can be used to test the working current value to obtain the inrush current, so you can choose a more appropriate APS series of products.

**) APGxx series  The output voltage range of the APS is 0 to 60V and the output current range is 0 to 400A.
The Max output frequency of sinusoidal signal is 30kHz；The instrument power is large enough to meet most of the test requirements

APSxx series   The output voltage range of the APS is 0 to 60V and the output current range is 0 to 30A. The Max output frequency of sinusoidal signal is 30kHz；

APSxxD series is a four quadrant power supply. The maximum output voltage of the product is 80V. The difference between positive and negative voltage output shall not exceed 100V. The product line meets the 48V test system. The product output current range is 0 to 30A.The sinusoidal signal output frequency up to 300kHz.

The test connection diagram: