Artificial Mains Network TAN 200J is designed as per CISPR 25 (2016) to isolate test equipment or devices from the power supply in order to test the disturbance characteristics of the vehicle, ship or internal combustion engine. It is equipped with standard impedance. EUT shall be connected to the output terminal on the front panel, and the power supply shall be connected to the input terminal
Design Schematic Diagram：
| Technical Parameters | |
|---|---|
| Test Voltage, Vmax | AC 250 V, 50 Hz / 60 Hz;125 V 400 Hz;
DC 500 V, |
| Test Current, Imax | 200 A |
| Instantaneous Max Current | 300 A |
| Temp. Rise Of The Inductor（ΔT） | About 65℃ (200 A, 2 H) |
| Testing Terminal | N type |
| Inductance | 5 μH |
| Coupling Capacitance | 0.1 μF |
| Impedance Frequency Range | 100 kHz-100 MHz |
| General Parameters | |
| Operating Temp. | 15℃ – 35℃ |
| Operating Humidity | 45% – 75% |
| Operating Air Pressure | 86 kPa – 106 kPa |
| Dimension | 500 x 200 x 200 mm |
| Weight | Approx. 25 kg |
Model：TANHV Series
The high voltage lisn TANHV series are used for isolating components and power source in test as per CISPR 25 and ISO 7637-4.
Model：TANHV Series
The high voltage lisn TANHV series are used for isolating components and pow
...
Model：HVSE 400
High-voltage shielding equipment HVSE 400 is designed to improve the shielding effect of artificial mains network TANHV 400, which is required for tests in the electric vehicles or hybrid electric vehicles.
Model：HVSE 400
High-voltage shielding equipment HVSE 400 is designed to improv
...
Model： TAN8124
TAN 8124 artificial network can be used as impedance of vehicle wire harness to test performance of electrical and electronic devices.
Model： TAN8124
TAN 8124 artificial network can be used as impedance of vehicle
...
Reviews
There are no reviews yet.