Low-k Dielectric Material for Laboratory Test

Low-k dielectric material for laboratory test adopts material with dielectric constant (εr) less than or equal to 1.4.

In Stock
Enquire Now

Description

Low-k dielectric material for laboratory test adopts material with dielectric constant (εr) less than or equal to 1.4. It features high strength and good heat resistance, and can be used as support material in EMC test.

Standard

  • ISO 10605
  • ISO 11452-4
  • GJB 151B
  • GB/T18655
  • GB/T 21437.2
  • GB/T 21437.3
  • GB/T 9254

Specifications

Model No. Overview
Model No. Standard Test Projects Requirement for dielectric constant Quantity Dimension(cm)

(L*W*H)

Note
DL 16010080 GB/T 9254 radio emission No requirement 1 pcs 160*100*80 Table 160*100*6cm
DL 100255 GB/T 18655 Vehicle electronic conducted test ≤1.4 1 pcs 100*25*5 Current method, with slotting at 5cm and 75cm. with cable tie
DL 50255 2 pcs 50*25*5 plane, insulation cable bundle
DL 60305 2 pcs 60*30*5 Plane
DL 100255 ISO 10605 Static electricity discharge 1~5 1 pcs 100*25*5 With magic tape tie and cable tie
DL 50255 2 pcs 50*25*5
DL 100255 ISO 11452-4 BCI test ≤1.4 1 pcs 100*25*5 with slotting at 5cm, 15cm, 45cm and 75cm, with cable tie
DL 50255 2 pcs 50*25*5 Planeplane, insulation cable bundle
DL 60305 2 pcs 60*30*5 Plane
Model No. Standard Test Projects Requirement for dielectric constant Quantity Dimension(cm)

(L*W*H)

Note
DL 50305 GJB 151B General setup As low as possible, not specified in standard 2 pcs 50*30*5 Make 5 slottings with 2 cm spacing distance along the long axis to put cable bundle.

Slotting width is 2 cm and the distance from slotting bottom to plan bottom is 5 cm.

DL 100305 2 pcs 100*30*5
DL 50255 GB/T 21437.2 Vehicle transient immunity test ≤1.4 1 pcs 50*25*5 insulation cable bundle
DL 60305 2 pcs 60*30*5
DL 100255 GB/T 21437.3 Vehicle transient immunity test ≤1.4 1 pcs 100*25*5 Plane, insulation cable bundle(1700mm)
DL 50255 2 pcs 50*25*5
DL 60305 2 pcs 60*30*5

Downloads

Adobe PDF

Reviews

There are no reviews yet.

Be the first to review “Low-k Dielectric Material for Laboratory Test”

Your email address will not be published. Required fields are marked *