Based on the theory of transmission line waveguides, the characteristic impedance is 50 ohms, and electromagnetic waves propagate in the guided wave structure in the form of quasi TEM waves, generating a relatively uniform surface current on the electrode plate. Used for surface current probe calibration and calibration.
| Technical Parameters | |
|---|---|
| Frequency range | 0 Hz-300 MHz |
| Characteristic impedance | 50 Ω |
| Standing-wave ratio | ≤2（0 Hz-100 MHz）/≤5（100 MHz-500 MHz） |
| Workplace size | 500 mm×1000 mm×200 mm |
| Interface type | N-type |
| Outer Dimensions | 1400 mm (length) * 1000 mm (width) * 200 mm (height) |
| Weight | About 25 kg |
Model：TPS-CS115
TPS-CS115 Fast Square Wave Pulse Generator is specially designed to meet MIL-STD-461E/F/G CS115, GJB 151A-97 CS115 and GJB 151B-2013 CS115.
Model：TPS-CS115
TPS-CS115 Fast Square Wave Pulse Generator is specially design
...
Model：PFS 181
Vehicle-mounted power failure simulator PFS 181 is specially designed generator for DC voltage dips immunity tests, capable of simulating conditions of voltage dips
Model：PFS 181
Vehicle-mounted power failure simulator PFS 181 is specially des
...
Model：WCT 20
The WCT 20 is used in conducted, differential mode current test as per IEC 61000-4-19.
Model：WCT 20
The WCT 20 is used in conducted, differential mode current test a
...
Model：CM 03203M
The CM 03203M is used for measuring alternating current and time domain pulse current in the frequency range from 200 Hz to 3 MHz.
Model：CM 03203M
The CM 03203M is used for measuring alternating current and ti
...
Reviews
There are no reviews yet.