BCICF-400 is used for the calibration of current injection clamps. current injection clamps are widely used to transmit time-harmonic signal current or pulse signal current to EUT through magnetic coupling, and has the characteristics of distortion-free waveform and physical isolation from EUT, meeting the requirements of MIL-STD-461E /F/G (CS114, CS115, CS116), ISO 7637-3:2007/2016 and other standard current injection requirements.
| Technical Parameters | |
|---|---|
| Frequency | DC 400 MHz |
| Typical Impedance | 50 Ω |
| Voltage Standing Wave Ratio | ≦3.5 |
| Internal Diameter | 100 mm |
| External Diameter | 128 mm |
| Height | 135 mm |
| Weight | 4.4 kg |
Model：CM 0103M
The CM 0103M is used for measuring alternating current and time domain pulse current in the frequency range from 200 Hz to 20 MHz.
Model：CM 0103M
The CM 0103M is used for measuring alternating current and time
...
Model：CST 1075C
The rf conducted immunity test system CS114 CST 10 series adopt all-in-one design, which integrate signal generator, RF power amplifier and RF power meter and each of them can be used independently.
Model：CST 1075C
The rf conducted immunity test system CS114 CST 10 series adop
...
Model：DOS-CS116
High Frequency Damped Sine Wave Generator DOS-CS116 is a high end generator which is designed to meet MIL-STD-461E/F/G CS116, GJB 151A-97 CS116.
Model：DOS-CS116
High Frequency Damped Sine Wave Generator DOS-CS116 is a high
...
Model：BCICF-200
The BCICF-200 is a kind of wide-band transmission/coupling device used for the calibration of current injection/monitoring clamps
Model：BCICF-200
The BCICF-200 is a kind of wide-band transmission/coupling dev
...
Reviews
There are no reviews yet.