Calibration Kit for Capacitive Coupling

Model：CA-CCC

Calibration kit for capacitive coupling clam CA-CCC is the calibration device of Capacitive Coupling Clamp (CCC), designed according to the latest international standards.

In Stock
Enquire Now
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

CA-CCC is the calibration device of Capacitive Coupling Clamp (CCC), designed according to the latest international standards.

Calibration Setup:
Place the transducer plate inside the CCC, and align it with the bottom of the CCC. Connect the transducer plate with the low-impedance adaptor AD-CA-CCC then the 50 Ω attenuator. The adaptor ensures that the attenuator be properly connected to the reference ground, and holds the attenuator over 100 mm above the height of the CCC.
The distance between the transducer plate and the attenuator shall be less 0.1 m.

Calibration Process:
Calibration of the Capacitive Coupling Clamp is performed through setting of the open-circuit voltage of the EFT/B generator. The output voltage of the 50 Ω attenuator should be 1,000 V.

Standard

  • IEC 61000-4-4
  • IEC 61000-4-18
  • GB/T 17626.18
  • GB/T 17626.4
  • EN 61000-4-4
  • EN61000-4-18

Specifications

General Parameters
Connector BNC;
Input Voltage Max 5,000 V;
Dimension of Insulating Material 1100 ± 5 mm × 130 ± 1 mm
Dimension of Copper Plate 1050 ± 5 mm × 120 ± 1 mm;

Plate thickness < 0.5 mm
Operating Temp. (23±5)℃
Weight Approx 300 g
Operating Humidity 35 – 80%
Operating Air Pressure 60 – 106 kPa

Downloads

Adobe PDF

Calibration Kit for Capacitive Coupling Clam CA-CCC Series Datasheet

Language: English

Reviews

There are no reviews yet.

Be the first to review “Calibration Kit for Capacitive Coupling”

Your email address will not be published. Required fields are marked *

Related products

  • EFT/Burst Simulators

    EFT/ Burst Simulator EFT 500x

    Model：EFT500x

    The EFT 500 series is the multifunctional test simulator for EFT/Burst with a built-in single phase or three phase coupling /decoupling network.

    Model：EFT500x

    The EFT 500 series is the multifunctional test simulator for EFT

    ...
    (0 reviews)
    Read more
  • EFT/Burst Simulators

    Electro-magnetic Interference Decoupling

    Model：EMID 1M

    The EMID 1M is used to decouple the interference signals in the EFT/Bursts immunity test as per IEC 61000-4-4 and GB/T 17626.4.

    Model：EMID 1M

    The EMID 1M is used to decouple the interference signals in the

    ...
    (0 reviews)
    Read more
  • EFT/Burst Simulators

    7kV Electrical Fast Transient/burst

    Model：EFT 700x

    EFT 700x series intelligent Electrical Fast Transient Simulator has been built-in fully automatic single-phase or three-phase power line coupling/decoupling network.

    Model：EFT 700x

    EFT 700x series intelligent Electrical Fast Transient Simulator

    ...
    (0 reviews)
    Read more
  • EFT/Burst Simulators

    High Voltage and High Power

    Model：EFT 700G&EFTN 70300T

    EFT 800x series including EFT 800G(source output), EFT 800S (built-in single-phase coupling/decoupling networks) and EFT 800T (built-in three-phase coupling/decoupling networks) are newly designed intelligent EFT/Burst simulators

    Model：EFT 700G&EFTN 70300T

    EFT 800x series including EFT 800G(source outpu

    ...
    (0 reviews)
    Read more