Electro-magnetic Interference Decoupling

Model：EMID 1M

The EMID 1M is used to decouple the interference signals in the EFT/Bursts immunity test as per IEC 61000-4-4 and GB/T 17626.4.

In Stock
Enquire Now
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0 Total: 0

Description

The EMID 1M is used to decouple the interference signals in the EFT/Bursts immunity test as per IEC 61000-4-4 and GB/T 17626.4. It can attenuate the transient burst signals for more than 20 dB and be used for attenuation of interference signals above 1 MHz as well as, with attenuation coefficient greater than 10 dB (related to signal frequency).This product is easy to use by adopting buckle structure and the cable to be decoupled can be directly put in it. At the same time, it is physically isolated from the decoupled cable.

Schematic Block Diagram for Test of Attenuation Factor

Standard

Specifications

Technical Parameters
Attenuation Factor for EFT/Bursts* ≥20 dB
Passing Cable Diameter 38 mm
Dimension 520 mm (L)×130 mm (W)×120 mm (H)
Working Temperature 0℃~65℃
Weight 7.5 kg

Downloads

Adobe PDF

Electro-magnetic Interference Decoupling Clamp EMID 1M Series Datasheet

Language: English

Reviews

There are no reviews yet.

Be the first to review “Electro-magnetic Interference Decoupling”

Your email address will not be published. Required fields are marked *

Related products

  • EFT/Burst Simulators

    High frequency noise simulator INS 400

    Model：INS 400

    The INS 400 high-frequency noise simulator is designed to simulate the interference generated when the relay is turned on or off as a representative of the inductive component.

    Model：INS 400

    The INS 400 high-frequency noise simulator is designed to simula

    ...
    (0 reviews)
    Read more
  • EFT/Burst Simulators

    Calibration Kit for Capacitive Coupling

    Model：CA-CCC

    Calibration kit for capacitive coupling clam CA-CCC is the calibration device of Capacitive Coupling Clamp (CCC), designed according to the latest international standards.

    Model：CA-CCC

    Calibration kit for capacitive coupling clam CA-CCC is the calibr

    ...
    (0 reviews)
    Read more
  • EFT/Burst Simulators

    EFT/B Calibration Kit TFB 500/1000

    Model：TFB 500/1000

    TFB 500/1000 are attenuators, capable of reducing the power of EFT/B without appreciably distorting its waveform.

    Model：TFB 500/1000

    TFB 500/1000 are attenuators, capable of reducing the power

    ...
    (0 reviews)
    Read more
  • EFT/Burst Simulators

    8kV Electrical Fast Transient/burst

    Model：EFT 800x

    EFT 800x series including EFT 800G(source output), EFT 800S (built-in single-phase coupling/decoupling networks) and EFT 800T (built-in three-phase coupling/decoupling networks) are newly designed intelligent EFT/Burst simulators.

    Model：EFT 800x

    EFT 800x series including EFT 800G(source output), EFT 800S (bu

    ...
    (0 reviews)
    Read more