Three-phase coupling/decoupling network

Model:SGN 3483T

SGN 3483T is designed to conduct surge test of combination wave. It is used to isolate surge signal.

In Stock
Enquire Now

Description

SGN 3483T is designed to conduct surge test of combination wave. It is used to isolate surge signal. When using normal three-phase mains network, voltage wave tail attenuates too fast, which cannot meet the requirements in standards. Performance of this network can meet GB/T3483. It is featured with stable performance, powerful load capacity during coupling/decoupling test for 4/300μs and 10/200μs voltage wave. It can be equipped with SG-5020G surge test system to prevent damage by surge signal.

  • Decoupling pulse voltage up to 20kV
  • Decoupling impulse current 10kA
  • Decoupling lightening voltage wave of long tail
  • Decoupling pulse width up to 300μs
  • Decoupling lightening surge waveform: voltage wave 4/300μs
  • Voltage wave 10/200μs
  • Combination wave 1.2/50μs,8/20μs
  • Combination wave 10/700μs,5/320μs

Standard

  • IEC 61000-4-5
  • IEC 61010-1
  • GB/T 17626.5
  • GB/T 3483

Specifications

Technical parameters
Lightening surge test Common mode coupling 9uF(+10Ω)
Deferential mode coupling 18uF
Injection surge voltage < 20kV
Injection surge current < 10kA(8/20μs
Impulse current test Coupling mode Gap coupling Voltage test more than 3KV
Capacitance coupling Voltage test less than 3KV
Injection surge voltage 1kV-20kV
Injection surge current < 20kA(8/20μs)
 Decoupling inductance 20mH
 Network load mains Three-phase five-wire AC380V 50Hz, DC220V
 Max. Load current 16A
 Mains switch mode Switch manually
 Coupling superimposition mode Manual
 Over load current for short time 1.1 times time≤1 minute
General parameters
Working power supply range AC 110V/220V(±10%),50/60Hz(AC 220V 50Hz for China mainland)
Operating Temperature 15 ℃ – 35 ℃
Operating Humidity 45%-75%
Operating air Pressure 86 kPa-106 kPa
Dimension 19’’/22U (600x800x1250mm)
Weight Approx 150 Kg

Downloads

Adobe PDF

Reviews

There are no reviews yet.

Be the first to review “Three-phase coupling/decoupling network”

Your email address will not be published. Required fields are marked *